5MP Super-HD Varifocal MultiConnect Bullet

$269.00 inc GST

5MP Varifocal Multi Connect Bullet : AHD/TVI/CVI/CVBS : 5MP 2592×1944 1/2.7″ CMOS : 2.8-12mm Zoom Lens : 30-50M IR Night Vision : Coax : IP66 : OSD : ICR : DWDR : DNR : AWB : BLC : Φ109x284mm



SKU: TVT-5MPVFMCBL Categories: , Tags: , , , , ,


5MP Varifocal Multi Connect Bullet : AHD/TVI/CVI/CVBS : 5MP 2592×1944 1/2.7″ CMOS : 2.8-12mm Zoom Lens : 30-50M IR Night Vision : Coax : IP66 : OSD : ICR : DWDR : DNR : AWB : BLC : Φ109x284mm

Have you been told you need to upgrade your cabling to get good quality modern CCTV?  Well that just isn’t the case.  Keep your previously installed copper coaxial (TV antenna style) cabling and camera power infrastructure and simply replace your cameras and recorder with new generation 2MP HD, 5MP Super-HD and 8MP Ultra-HD cameras.

A varifocal lens allows you to adjust the field of view making is slightly wider than the standard cameras or a lot narrower.  As you narrow the focal angles you also push the focal point so that what is in clear focus is a little further away from the camera than usual.  Specifically the focal length can be adjusted between 2.8 and 12mm depth.

(Please note this is not an IP camera.  It is a multi-connect camera designed for use with coax RG59 or RG6 cabling.)

If you have very long cable installations with 24V AC power to your old cameras check with us on the options for camera side power conversion from 24VAC down to 12V DC..





The TVT-5MPVFMCBL is ideal for old camera upgrades to Super-HD 5MP where existing RG6 or RG59 coaxial cable and DC12V power is already installed.  Match with the modern BNC coaxial cable DVRS from Q-See such as the QTH87, QTH167 and QTH327.  Cluster multiple QTH327 DVR for 64, 96 and 128 channel support, retain your investment in your expensive copper coaxial cable byt just replacing the cameras and recorder unit.

The Q-See QTH DVRs support older D1 and WD1 (960H) analog cameras so you can replace some of your old cameras with the TVT-5MPVFMCDM or TVT-5MPVFMCBL, replace your DVR and keep some old cameras.  Upgrading over time as cameras fail or budgets allow.

All Q-See QTH DVRs and QT NVRs work together with QT-View software fo interoperability and access to common management apps on your mobile and programs on your servers, PCs and desktop Apple Macs.  Q-See gives you true Multi-Platform watching!




Image Processing

Advanced image processing clears the way to a better view, day or night with Digital WDR, Back Light Compensation and 3D noise reduction.








Image Sensor 1 / 2.7″ CMOS
Image Size 2592×1944
Electronic Shutter Auto;1/50s~1/100000s(PAL);1/60s~1/100000s(NTSC)
Frame Rate 20fps
Min. Illumination Color:0.01lux@F1.2, AGC ON B/W:0lux with IR
Lens 2.8mm ~ 12mm Varifocal (Adjustable focus and field of view)
Lens Mount D14
Day & Night ICR
Wide Dynamic Range Digital WDR
Auto Gain Control (AGC) Yes
Digital NR 3D DNR
Auto White Balance Yes
Front Light Compensation Yes
Global and Central Exposure Yes
Signal / Noise Ratio (S/N ratio) ≥52dB (AGC Off)
Smart IR Yes
Defect Correction Yes
Defogging No
Angle Adjustment Any angle


Video Output AHD / TVI / CVI / CVBS (960H) / PAL or NTSC
Resolution 5MP (2592×1944) / 1080P 2MP ( 1920×1080 ) / 720P 1.3MP ( 1280×720 ) / D1 & CIF (480×240)
Main Stream 60Hz 5MP( 1 ~ 20fps ) / 1080P ( 1 ~ 30fps ) / 720P ( 1 ~ 30fps )
Main Stream 50Hz 5MP( 1 ~ 20fps ) / 1080P ( 1 ~ 25fps ) / 720P ( 1 ~ 25fps )
Image Settings OSD (COC Control)


Video Signal BNC Male connector
Audio No
Video Control Switchable output with On Screen Display. No separate CVBS output


IR Distance 20 ~ 30 m
Ingress Protection IP66


Power Supply DC12V with DC Female connector (±10%)
Power Consumption < 90mA
IR Consumption ON < 245mA
Operating Environment – 30°C ~ 50°C / <90 % relative humidity non-condensing
Dimensions (mm) Φ109×284






You may also like…