• myHome4x2MP_rect_bul
  • QSI-QT878-B_512x512
  • QSI-QT878-B_2_512x512
  • QSI-QTN8016D_512x512
  • QSI-QTN8037B_512x512.png
  • HDD-SG-1TB_512x512.png
  • CAC-CAT5e-20M_512x512.png
  • CAC-CAT5e-2M_512x512

Q-See CCTV Kit – 4x 2MP Bullet Cameras, 8Ch, 8MP NVR & Accessories

$749.00 inc GST

myHome Bundle : 4x 2MP 1920×1080 High Def IP cameras : Bullet style : 8Ch 8Megapixel UHD 4K Q-See Network Video Recorder : 1TB Hard Drive : Cable & Connector set (Ethernet)



myHome Bundle : 4x 2MP 1920×1080 High Def IP cameras : Bullet style : 8Ch 8Megapixel UHD 4K Q-See Network Video Recorder : 1TB Hard Drive

The Q-See myHome bundle ships as one of the industries most complete kits, ready for the home handy man (or woman), security consultant, electrical trades professional or technical support expert to install.

This kit represents the latest in “Mega” high definition with a 8 Megapixel capable 8 channel Network video Recorder that supports output to a 4Kx2K or UHD input TV or Monitor.  To leverage the capability of this latest generation NVR at an entry level price point we have included the high reliability Q-See QTN8016D or QTN8015B 2MegaPixel cameras and all required accessories.

This kit uses the modern Ethernet style data networking commonly found for computer networks but rather than requiring you to already have such as network in place or build one at additional cost we include everything you may require for a neat, complete professional deployment.  Just add a little sweat!

The Recorder:

You will see this kit ships with a fantastic Q-See Network Video Recorder (NVR), the Q-See QT878, with a 1TB hard drive storage drive as standard.  This “Mega” High Definition (HD or HD-IP) unit supports up to 8x cameras in 8Megapixel recording mode at 25 frames per second at 3264×2448 resolutions.  Compression is by either the standard H.264 or the newer H.265 video codec and the video output HDMI support is up to a 4Kx2K monitor or TV.

While it is difficult to say definitively how long you will be able to store footage for given the variables involved as an estimate with 4x cameras, 1TB storage, typical motion detection, 15 frame per second recording and medium H.264 compression should allow for up to 10 days of archive.  Increase your hard drive capacity if this does not seem enough.  A 4TB drive upgrade is highly recommended.

The cameras:

This myHome bundle comes with 4 beautiful High Definition Q-See 2 Megapixel IP cameras encoding in H.264 at up to 25 fps.  The cameras included are fixed lens 3.6mm models that “look” in a typical 79° field of view with an in focus point 3 to 4 meters from the camera.  They are ideal for typical standard use, both indoors and out.  A few screws and connection with the included 20 meter Cat5e infrastructure cable and you are ready to record.

The accessories:

All Perisale DIY kits include a great range of accessories for professional installation.  The myHome bundles include 20 meter Cat5e Ethernet infrastructure cables that are used to run from the camera through your roof and wall cavities down to a wall hole plate.  At the wall hole plate you will pass the cable through and connect the Cat5e RJ45 connector to the network video recorder (NVR).  Its that simple.  Just one cable to each camera.

We also provide 2 meter patch leads that will connect the back of your NVR to your home ADSL router.  In this way setup is very simple as no separate switch is required.  From your ADSL router you also need to connect via Ethernet cable to the QT-878 NVR.  If you need a cable longer than 2 meters you will need to purchase this separately.

If you dont have a home or small business ADSL or other internet service and dont wish to access your network video recorder and streams over the Internet then simply plug the QT874 with the supplied HDMI cable to your TV or monitor and you will be recording and viewing video footage in no time.