myBusiness Bundle : 8x 5MP 2560×1920 Ultra High Def IP cameras : Dome style : 32Ch 8Megapixel UHD 4K Q-See Network Video Recorder : 16 PoE Ports : 1TB Hard Drive : Cables & Connectors
The Q-See myBusiness bundle ships as a complete kit ready for the home handy man (or woman), security consultant, electrical trades professional or technical support expert to install.
This kit represents the latest in “Mega” high definition with a 8 Megapixel capable 32 channel Network video Recorder that supports output to a 4Kx2K or UHD input TV or Monitor in 3840×2160 resolution. To leverage the capability of this latest generation NVR we have included the high reliability Q-See QTN8053D or QTN8052B 5MegaPixel cameras and all required accessories.
This kit uses the modern Ethernet style data networking commonly found for computer networks but rather than requiring you to already have such as network in place or build one at additional cost we include everything you may require for a neat, complete professional deployment. Just add a little sweat!
You will see this kit ships with the business grade Q-See QT816 Network Video Recorder (NVR), a 1TB hard drive storage drive as standard and all accessories. This Ultra High Definition 4K unit supports up to 32x cameras in 8Megapixel recording mode at 25 frames per second at 3840 x 2160 resolutions. Compression is by either the standard H.264 or the newer H.265 video codec and the video output HDMI support is up to a 4Kx2K monitor or TV. Included are 16PoE built in ports for local connectivity. Expand this with the Q-See PoE distributed switch range for another 16 cameras.
While it is difficult to say definitively how long you will be able to store footage for with so many variables involved as an estimate with 4x cameras, 1TB storage, typical motion detection, 15 frame per second recording and medium H.264 compression should allow for up to 10 days of archive. Increase your hard drive capacity if this does not seem enough. A 4TB drive upgrade is highly recommended.
This myBusiness bundle comes with 8 beautiful Ultra High Definition Q-See 5 Megapixel IP cameras encoding in H.265 at up to 25 fps. The cameras included are fixed lens 3.6mm models that “look” in a typical 87° field of view with an in focus point 3 to 4 meters from the camera. They are ideal for typical standard use, both indoors and out. A few screws and connection with the included 20 meter Cat5e infrastructure cable and you are ready to record.
All of our DIY kits include a great range of accessories for professional installation including 20 meter Cat5e Ethernet infrastructure cables that are used to run from the camera through your roof and wall cavities down to a wall hole plate. At the wall hole plate you will pass the cable through and connect the Cat5e RJ45 connector to the network video recorder (NVR). Its that simple. Just one cable to each camera.
We also provide 2 meter patch leads that will connect the back of your NVR to your home ADSL router. In this way setup is very simple as no separate switch is required. From your ADSL router you also need to connect via Ethernet cable to the QT-878 NVR. If you need a cable longer than 2 meters you will need to purchase this separately.
If you want a more advanced setup with keystone Ethernet pass through and split cables between the wall cavity and room side please call us for advise as to which keystone accessories to add.
If you don’t have a home or small business ADSL or other internet service and dont wish to access your network video recorder and streams over the Internet then simply plug the QT874 with the supplied HDMI cable to your TV or monitor and you will be recording and viewing video footage in no time.