myBasics Bundle : 4x 2MP 1920×1080 High Def IP cameras : Bullet style : 4Ch 2Megapixel Q-See Network Video Recorder : 1TB Hard Drive : Cables & Connectors set
The Q-See myBasics bundle ships as a complete kit ready for the home handyperson, security consultant, electrical trades professional or technical support expert to install.
This kit meets all requirements for a simple to install basic feature high definition home CCTV kit with 4 2Megapixel HD cameras and 1TB local storage.
This kit uses the modern Ethernet style data networking commonly found for computer networks but rather than requiring you to already have such as network in place or build one at additional cost we include everything you may require for a neat, complete professional deployment. Just add a little sweat!
You will see this kit ships with the workhourse Q-See QT844 Network Video Recorder (NVR) with a 1TB hard drive storage drive as standard. This High Definition (HD or HD-IP) unit supports up to 4x cameras in 2Megapixel recording mode at 25 frames per second at 1920×1080 resolutions. Compression is by the standard H.264 codec and the video output HDMI supports all modern TVs. monitors and displays.
While it is difficult to say definitively how long you will be able to store footage for given the variables involved as an estimate with 4x cameras, 1TB storage, typical motion detection, 15 frame per second recording and medium H.264 compression should allow for up to 10 days of archive. Increase your hard drive capacity if this does not seem enough. A 4TB drive upgrade is highly recommended.
This myHome bundle comes with 4 beautiful High Definition Q-See 2 Megapixel IP cameras encoding in H.264 at up to 25 fps. The cameras included are fixed lens 3.6mm models that “look” in a typical 79° field of view with an in focus point 3 to 4 meters from the camera. They are ideal for typical standard use, both indoors and out. A few screws and connection with the included 20 meter Cat5e infrastructure cable and you are ready to record.
All Perisale DIY kits include a great range of accessories for professional installation. The myHome bundles include 20 meter Cat5e Ethernet infrastructure cables that are used to run from the camera through your roof and wall cavities down to a wall hole plate. At the wall hole plate you will pass the cable through and connect the Cat5e RJ45 connector to the network video recorder (NVR). Its that simple. Just one cable to each camera.
We also provide 2 meter patch leads that will connect the back of your NVR to your home ADSL router. In this way setup is very simple as no separate switch is required. From your ADSL router you also need to connect via Ethernet cable to the QT-844 NVR. If you need a cable longer than 2 meters you will need to purchase this separately.
If you dont have a home or small business ADSL or other internet service and dont wish to access your network video recorder and streams over the Internet then simply plug the QT844 with the supplied HDMI cable to your TV or monitor and you will be recording and viewing video footage in no time.